TM 5-2590-512-13&P
4.
Ground guide then directs Auger operator to
stop, and shut down engine.
5.
Remove any excess mud and dirt from the
top area (1) of Auger (2).
6.
Remove the hitch pin clip (3) and slide out
hex pin (4) from Auger Drive Unit (5) shaft
(6).
WARNING
Use a suitable lifting device or
appropriate
personnel
to
move
auger: Use gloves when handling
auger to prevent injury to hands.
7.
Lift and slide Auger (2) away from Auger
Drive Unit (5).
8.
Store Hex Pin (4) and Hitch Pin clip (3) in
thru hole on Auger (2) hex shape hollow
output shaft at top area (1).
9.
Move Auger to companion vehicle and secure for transporting.
c.
Installation.
WARNING
Use a suitable lifting device or appropriate personnel to move auger. Use gloves
when handling Auger to prevent injury to hands.
1.
Remove Auger from companion vehicle and place in position on ground adjacent to Auger Drive nit.
3-5