b. Installation.
chain mounting block (3). Secure using four new cotter
pins (5).
CAUTION
(3) Install chain mounting block (3) on slabback (4)
Do not grease chain.
using three screws (1) and new lockwashers (2).
(1) Wrap chain (7) around sprockets. Ensure that
Adjust chain (see TM 5-3820-241-12).
(4)
chain properly engages all sprockets.
(2) Connect two master links (6) on chain (7) to
Page I-1. Appendix B is added before the index as follows:
APPENDIX B
ILLUSTRATED LIST OF MANUFACTURED ITEMS
Section I. INTRODUCTION
B-1.
Scope
B-2.
Manufactured Items Part Number Index
This appendix includes complete instructions for making
items authorized to be manufactured or fabricated at di-
Part
Figure
rect support maintenance.
Number
Description
No.
A part number index in alphanumeric order is provided for
Chuck bushing and driver
cross-referencing the part number of the item to be man-
removal tool
B-1
ufactured to the figure that covers fabrication criteria.
Chuck bushing and driver
All bulk material needed for manufacture or an item are
installation tool
B-2
listed by part number or specification number in a tabular
list on the illustration.
17
