TM5-3820-241-34
b. Disassembly.
(1) Disassemble the feed swing cylinder in
numerical sequence as illustrated in figure 3-6.
ME 3820-241-34/3-6
1 Button head capscrew
10 Piston
19 Back up ring
28 Spring
2 Lockwasher
11 U-cap
20 Gland nut
29 Poppet
3 Piston rod assembly
12 O-ring
21 Rod wiper
30 Pipe plug
4 Rod end bushing
13 Backing plate
22 Pipe plug
31 Pilot check piston
5 Rod end spacer
14 Cylinder head
23 Pivot check piston
32 Bushing
6 Lock nut
15 Cylinder head spring
24 Pipe plug
33 Bushing
7 Backing plate
16 Male adapter
25 Spring
34 Spacer
8 O-ring
17 Packing
26 Poppet
35 Barrel head
9 U-cup
18 O-ring
27 Pipe plug
36 Barrel assembly
Figure 3-6. Feed swing cylinder, disassembly and reassembly.
(2) Use a suitable drift to drive out bushings
(2 and 33) and spacers (3 and 34).
3-9. Feed Swing Cylinder Cleaning, Inspection
and Repair
Clean, inspect and repair the feed swing cylinder
in a similar manner as outlined in paragraph 3-3.
(1) Reassemble the feed swing cylinder in the
reverse of numerical sequence as illustrated in
figure 3-6.
(2) Align the holes in spacers (5 and 34) with
the holes in piston rod (3) and barrel head (35).
Lubricate and press spacers (5 and 34) and
bushings (4, 32, and 33) into position.
3-10. Feed Swing Cylinder Reassembly and
b. Installation.
Installation
(1) Install the feed swing cylinder in reverse
a. Reassembly.
of numerical sequence as illustrated in figure 3-5.
3-10
