TM 5-3820-239-15
bolt (1, fig. 6-17) to a torque of 12 to 16
6-46. Cleaning
feet-pound.
Clean all parts with an approved solvent, and
b. Throttle Valve. Reassemble throttle valve
blow dry with compressed air.
in reverse of numerical sequence as illustrated
on figure 6-18.
6-47. Inspection and Repair
a. Inspect all parts for wear and damage.
6-49. Installation
b. Inspect all h a r d w a r e f o r d a m a g e d
threads. Retap or rechase threads if stripped
connect the return line oil filter in the line to
or crossed, or replace if unserviceable.
the hydraulic reservoir in the boom base as-
sembly.
6-48. Reassembly
b. Throttle Valve. Mount the throttle valve
a. Return Line Oil Filter. Reassemble return
on the nipple of the hydraulic valve mounting
line oil filter in reverse of numerical sequence
bracket. See figure 1-5 and connect the throttle
as illustrated on figure 6-17. Tighten body
valve fittings.
MEC 3820-239-15/6-17
1 Body bolt, hex-hd
7
Retaining ring
2 Washer, flat
8
Washer, flat
3 Filter body
9
Spring
4 Spring
10
Poppet
5 Filter element
11
Base
6 Gasket
