5-10.
Hose Bulkhead Replacement
a. Removal.
(1)
Tag and disconnect hoses (1).
(2)
Remove elbows (2) and swivels (3) from
hose bulkhead (4).
(3)
Remove two nuts (5), lockwashers (6),
flatwashers (7), and bolts (8) securing hose bulkhead (4)
to feedshell (9). Remove hose bulkhead. Discard
lockwashers.
b.
Installation.
(1)
Install hose bulkhead (4) on feedshell (9)
using two bolts (8), flatwashers (7), new lockwashers (6),
and two nuts (5).
NOTE
First and third hoses have swivels and
elbows. Second and fourth hoses have
elbows only.
(2)
Wrap male threads on swivels (3) and
elbows (2) with antiseize tape. Install swivels and elbows
in hose bulkhead (4).
(3)
Connect hoses (1) and remove tags.
5-11.
Foot Replacement
a.
Removal. Remove six locknuts (1), bevel
washers (2), flatwashers (3), and bolts (4) securing foot
(5) to feedshell (6). Remove foot. Discard locknuts.
b.
Installation. Install foot (5) on feedshell (6) using
six bolts (4), flatwashers (3), bevel washers (2), and new
locknuts (1).
17
