b. Installation.
chain mounting block (3). Secure using four new cotter
CAUTION
pins (5).
Do not grease chain.
(3)
Install chain mounting block (3) on slabback (4)
(1)
Wrap chain (7) around sprockets. Ensure that
using three screws (1) and new lockwashers (2).
chain properly engages all sprockets.
(4)
Adjust chain (see TM 5-3820-241-12).
(2)
Connect two master links (6) on chain (7) to
Page I-1. Appendix B is added before the index as follows:
APPENDIX B
ILLUSTRATED LIST OF MANUFACTURED ITEMS
Section I. INTRODUCTION
B-1.
Scope
This appendix includes complete instructions for making
items authorized to be manufactured or fabricated at di-
rect support maintenance.
A part number index in alphanumeric order is provided for
cross-referencing the part number of the item to be man-
ufactured to the figure that covers fabrication criteria.
All bulk material needed for manufacture or an item are
listed by part number or specification number in a tabular
list on the illustration.
B-2.
Manufactured Items Part Number Index
Part
Figure
Number
Description
No.
Chuck bushing and driver
removal tool
B-1
Chuck bushing and driver
installation tool
B-2
17
